October 2008

1

Using inotify in a pygtk application without pyinotify

Posted on Friday, 24 October 2008

I am lazy. There's no denying it, it's simple fact.

That means, for example, when I am working with pygtk and I look at the API for pynotify, I am sad, because it's a polling API and I hate polling.

What I like is GTK's event model. I like telling it what to run when things happen and letting it take care of all the pain for me. Obviously it's possible to write some code which will do the polling and then trigger an event, but that compromises my freedom to be lazy.

Step in pygobject, which contains the bindings for GIO. Within the bowels of this beastie are the required components to monitor a file for changes in a very few lines of python:

#!/usr/bin/python
import gtk
import gio

def file_changed (monitor, file, unknown, event):
  if event == gio.FILE_MONITOR_EVENT_CHANGES_DONE_HINT:
    print "file finished changing"

file = gio.File('/path/to/some/file')
monitor = file.monitor_file ()
monitor.connect ("changed", file_changed)
gtk.main()

That's it. I don't know what the "unknown" argument for the callback is, probably the optional user_data connect() argument and this is but a small part of what inotify/GIO can do, but if you just care about being told when a file is updated, it'll do (with caveats that you can never really know when a file has finished being changed, so be careful to validate it before you trust its contents).

0

Ubuntu 8.10 (Intrepid) power performance

Posted on Thursday, 9 October 2008

In one word: wow.

Out of sheer curiosity last night I fired up the excellent powertop and decided to see how my system was doing. It was producing a couple of hundred fewer interrupts per second than it did in 8.04 (Hardy), and was using 1-2Watts less power.

Previously I have always resisted applying tweaks to my laptop that would attempt to reduce power, but since things were improving, the temptation was simply too great and I started digging out all the resources on this (by far the most useful being the tips on Intel's grammatically horrific http://www.lesswatts.org/). I had two reasons for not doing this previously - firstly I didn't want to deviate too much from a default install of Ubuntu (if only because it makes it much harder to reproduce bugs), but secondly I kept running into little weirdnesses. The most inconvenient of these was enabling AHCI link power management (which basically puts the hard disk bus to sleep when there is no IO); Enabling this and then suspending the laptop produced a 5 second delay on resuming because the kernel was forgetting it had put the bus to sleep and so had to wait for it to time out and be reset.

This particular niggle is fixed in 2.6.27 and so my 3-4 second resume times are preserved and I can save power! \o/

After a little while tweaking disk, AHCI, USB, filesystem, wireless, sound and ethernet options I ended up with a system which runs between 8 and 9 Watts when idle, down from 10-14 Watts, which I think is a pretty impressive saving and I'm very curious to find out from other Thinkpad X300 owners how well Windows performs in the power usage stakes - we always hear that Linux is a bit worse, but I'd be really quite surprised if the machine can run with very much less - it's spending (when idle, obviously) 99% of its time in the deepest processor sleep state and is only generating about a hundred interrupts per second (about 70-80% of which are due to my using a 3D desktop and wireless).

16

openssh 5.1 chrootdirectory permissions issue

If you're playing with the excellent new ChrootDirectory and internal-sftp options in recent OpenSSH releases (such as 5.1 which is in Ubuntu 8.10 Intrepid), you may have hit an error like:

fatal: bad ownership or modes for chroot directory

You may also have searched on Google for what to do about it and come away with very little useful information.

Well no more! I did the same thing and got bored of reading mailing list posts, so read the source code instead. The relevant section is in session.c:
    if (stat(component, &st) != 0)
      fatal("%s: stat(\"%s\"): %s", __func__,
          component, strerror(errno));
    if (st.st_uid != 0 || (st.st_mode & 022) != 0)
      fatal("bad ownership or modes for chroot "
          "directory %s\"%s\"",
          cp == NULL ? "" : "component ", component);

This is quite simple really, it's stat()ing the directory specified for "ChrootDirectory" and all its parents up to / and checking that they are:

  • owned by root

  • not group or other writable

  • (it also checks they are actually directories, but I'm going to assume you're not stupid enough to try and chroot into a file ;)


Note my emphesis that these checks apply to the chroot directory itself and its parents and /, so if you are chrooting users into /srv/chroot/ then you need to ensure that /, /srv and /srv/chroot are owned by root and not writable by the group (even if it's root, bizarrely) or other users.

Sorted.

0

Quick guide to saving power with USB devices

I have a laptop with some USB stuff built in. Some devices (such as Bluetooth) can be made to entirely disappear from the USB bus, however, the fingerprint reader and webcam can't, but they sit on the USB bus and draw power.

Fortunately the USB specs allow devices to be put to sleep if they're not being used and support that feature. Unfortunately many devices advertise they support it when they really don't, so Linux is unable to automatically put every USB device to sleep.
Fortunately you can control the setting by hand, and this is how. Firstly, start off with a Terminal and run the command "lsusb":

cmsj@kodachi:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 17ef:4807 Lenovo
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
cmsj@kodachi:~$


You can ignore the "root hub" entries, the interesting two are "SGS Thomson Microelectronics Fingerprint Reader" (guess which device that is ;), and "Lenovo" (this is the webcam).

So now we need to poke at those devices to enable their autosleeping. If we look at the entry for the webcam:

Bus 004 Device 002: ID 17ef:4807 Lenovo



I've highlighted "4807". This is the Product value for this USB device (if you're curious, the "17ef" part is the Vendor value and uniquely identifies the maker of this device).

Now we need to find out where abouts the webcam lives in the /sys/ filesystem (which is something the kernel provides to give applications lots of information about the hardware in your system).

The following command will put us on the right path:
grep 4807 /sys/devices/*/*/usb*/*/idProduct

Which, on my laptop, returns:
/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-5/idProduct:4807

Take that information you get, and chop the "idProduct:4807" bit off the end, just leaving "/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-5/" (yours will look a little different to this) and add "power/level" to the end.

You should now have something that looks pretty much like "/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-5/power/level" and if you get the current setting:
cmsj@kodachi:~/Desktop$ cat /sys/devices/pci0000:00/0000:00:1d.7/usb4/4-5/power/level
on
cmsj@kodachi:~/Desktop$

you can see it is "on", which means it will not be automatically put to sleep. To change that, run:
echo "auto" | sudo tee /sys/devices/pci0000:00/0000:00:1d.7/usb4/4-5/power/level

and test if your device still works (so if it's a webcam, fire up "cheese", or if it's a fingerprint scanner that you use, test if it still accepts your finger). If everything is good then you can put something in /etc/rc.local so the power saving will be set up every time you reboot your computer:
echo "auto" > /sys/devices/pci0000:00/0000:00:1d.7/usb4/4-5/power/level

and that's it! Repeat this for all the USB devices in your laptop and enjoy the power saving (run "powertop" about 10 minutes before you start doing this so it has time to get a good average of your power usage, then see how much difference this makes. It could be up to 0.5Watts per device). Note that this won't work particularly well for external USB devices you plug in, becuase the /sys/ path won't exist until you plug the device in, so you'd need to do the above steps every time you connect it.

Hopefully HAL will start whitelisting devices which can be suspended, but I don't know of any work in this direction at the moment.